Bay window installation is advantageous as it helps us to enhance the view of the scenic beauty, which can be seen from our window. Many people these days replace their old windows with bay windows due to this reason. The bay window installation job can be done by replacing the frame of your previous window with that of the bay window. The bay window installation cost is low if this technique is used. You can also install a new bay window along with the relevant flooring and ceiling ideas which will have a high bay window installation cost. Now, let us understand the process of bay window installation in the next few paragraphs.
Essential Materials for Bay Window Installation
Here’s a list of tools and equipments which you will need for a successful bay window installation:
- Battery operated saw and power drill
- Battery chargers, if the battery runs low
- Cement saw, if the cutting is to be done through a cement block
- Retractable tape
- Wood shims
- An accurate leveler
- Goggles for protecting the eyes
- Plugs and screw caps
Bay Window Installation
Before the actual bay window installation process begins, you will have to finalize the size and the type or the style of the bay window which is to be installed. The complications in the bay window installation will increase if you want to install it at a height which is higher than the first floor. Get the kit ready for the bay window installation and mark the window outlines according to the new dimensions of the bay window, after taking correct measurements of the frame of the window.
For installing bay windows successfully, your material kit must contain seat windows and the head boards. Make sure that you have necessary material for installation and have uninstalled the existing windows and frames. You get an instruction manual with the kit which should be studied thoroughly. Now, you should assemble the windows as per the bay window installation instructions in the manual and use a toenail to install the window frame. Screws are used in this installation process to properly position the frames of the window. Place the windows in the frame by the help of shims and check whether the positioning of the window is at the appropriate level of the frame of the window.
You can take help from some other people in the bay window installation, as the parts and materials required for the same are quite heavy. Now, you need to install the head boards very firmly with the help of screws. Installing insulating window film between the top end of the bay window and the top of the roof is very essential. The headboard is attached shingles and the edges of the rooftop are secured by using a metal strip.
Some fiberglass insulation is used to fill the place which is to the bottom of the frame of the window and at the same time, you should also connect the window frame to the bottom skirt frame from the outside. Since the weight of the window is large, you will need to give support to the bay window by using a good wooden rod with a diagonal support.
Bay Window Installation Cost
You should be aware of the bay window installation prices before you take a decision of bay window installation. You can get the bay window installed at a low price if it is of the same size as that of the original one. The bay window installation cost can be between US$ 3,000-US$ 9,000 depending on various factors. The standard version bay windows are available for US$ 1,500, but if you opt for an extra large model, this can go up considerably. Those who are planning to add a copper roof over the bay window should be willing to spend around US$ 2,000 more.
I think that this article has helped you well in your bay window installation. You will definitely like the beautiful effect of these bay windows once they are installed.
